217562 - Machinist

Chipton-Ross is seeking a Machinist for a contract opportunity in Orlando, FL.

BASIC QUALIFICATIONS (REQUIRED SKILLS/EXPERIENCE):

• Candidate must have at least 5 years of hands on CNC machining, with at least 3 years on Mitsui Seiki machines experience.
• Candidate must have at least 2 years experience operating Fanuc CNC controllers.
• Candidate must have at least 2 years experience with 5 Axis Expertise - Proven ability to set up, program, and run 5 axis milling and turning on Fanuc controlled Mitsui Seiki equipment.
• Candidate must have at least 2 years experience with Fanuc CNC.
• Candidate must have at least 2 years experience with in Fanuc ISO programming, macro B, canned cycles, and parameter configuration.
• Candidate must have at least 2 years experience with editing, troubleshooting, and optimizing Fanuc G Code/M Code.
• Candidate must have at least 2 years experience with Renishaw Probing -Direct experience configuring, programming, and interpreting Renishaw touch trigger or laser trigger probing cycles within Fanuc programs.
• Technical Skills – Machine Tools
• In depth knowledge of Mitsui Seiki machine architecture (spindle, turret, multi tasking options).
• Ability to perform preventive maintenance and basic repairs on Mitsui Seiki equipment.
• GD&T & Drawing Interpretation
• Ability to read and interpret 2 D/3 D drawings using ANSI Y14.5 (1982/1994) standards.
• Tooling & Fixturing Demonstrated ability to design and fabricate custom fixtures and work holding for multi axis operations on Mitsui Seiki machines.
• Measurement Expertise Skilled with Renishaw probes, CMMs, laser scanners, micrometers, calipers, and other high precision measurement tools.
• Problem Solving Proven track record of diagnosing machining and probing issues, optimizing Fanuc programs, and reducing scrap on Mitsui Seiki platforms.
• Documentation Experience maintaining accurate work order records, setup sheets, inspection reports, and probe data logs.
• Safety & Compliance Familiar with OSHA, ANSI, and company safety standards; commitment to a clean, safe shop environment.

POSITION RESPONSIBILITIES:

• Analyze engineering drawings, select the appropriate Mitsui Seiki machine and develop detailed process plans for high complexity parts.
• 5 Axis Milling & Turning on Fanuc Set up, program, and run 5 axis milling and turning cycles using Fanuc controllers (e.g., 30i/31i/32i/45i series).
• Optimize toolpaths for surface finish, cycle time, and tool wear.

Fanuc CNC Programming & Execution • Write, edit, and debug G Code/M Code on Fanuc CNC (ISO/ISO compatible) including macro programming, sub programs, and canned cycles.

• Implement probing cycles, first piece runs, and post processor adjustments specific to Fanuc syntax.

Renishaw Probing & In Process Inspection • Configure Renishaw touch trigger or laser trigger probing cycles within Fanuc programs.

• Develop inspection plans (single point, multi point, surface mapping) that execute automatically during machining.
• Capture, analyze, and report probe data; feed results back into process improvement loops.
• Tooling & Fixturing Design Design, fabricate, and install custom fixtures and work holding solutions compatible with Mitsui Seiki spindle and table geometry for multi axis operations.
• Setup & Build to Print Production Perform complete machine setups from raw material to finished part using process documentation or “build to print” methods; select appropriate hand tools and auxiliary equipment for Mitsui Seiki machines.
• GD&T & Drawing Interpretation

Read and apply ANSI Y14.5 (1982 & 1994) Geometric Dimensioning & Tolerancing standards to verify part features and tolerance stacks.

• Precision Measurement & Verification Use Renishaw probes, CMMs, laser scanners, micrometers, calipers, and other precision instruments to confirm dimensions and tolerances; generate formal inspection reports.

Process Improvement Identify and recommend tooling, program, or design changes that improve manufacturability, reduce cycle time, or enhance quality on Mitsui Seiki/Fanuc platforms.

• Rework & Calibration Rework non conforming parts, calibrate machining centers, spindle run out, and probing heads; maintain traceable adjustment records.
• Time & Cost Estimation Provide accurate labor and machine time estimates for assigned work orders; assist production scheduling.
• Mentorship & Training Train junior machinists on Mitsui Seiki machine operation, Fanuc controller programming, Renishaw probing setup, and best practice troubleshooting.

REQUIRED EDUCATION:

• Education High school diploma/GED required; associate’s degree or technical certification in Machining, Manufacturing Technology, or a related field preferred.

WORK HOURS:

• Full-Time-4/10-2nd Shift.